Solar Shower model DINO color Black

Functional and economical, with a large 26-liter tank and foot wash tap, for many hot showers that you can take anywhere without paying anything. Just choose the place where you want to install this solar heated shower model DINO by SINED,

Ergonomic with its steel terminal part and aluminum tank. Ideal for outdoor swimming pools, gardens, public and private use. Unbeatable value for money.

Anti-limescale filter and practical protective bag for storing the product in 190 cloth fabric, as a gift.

Height 225 cm, base dimensions 25×25 cm

The shower is individually pressure tested immersed in a tub of water, after the test it is dried, checked again and carefully packaged with custom protections.

Complete with

– Everything needed for assembly

– Ideal for gardens swimming pools.

– 26 litre water tank

– Height 225 cm

– 20×20 cm square shower head in Black Matt metal

– Shower head with anti-limescale silicone nozzles

– Base dimensions 25×25 cm

– Foot washer tap

– Chrome-plated accessories in Black Matt metal

– Anti-limescale filter

– High quality mixer cartridge

– Recommended water pressure 3.5 bar

– Internal Braid pipes 15 Kg pressure

– Fixing plugs supplied

– Fixing with special protective Nylon bushings

– Protective bag for storing the product in 190 cloth fabric

– Inlet tap

Some advice

Water coming out of the shower head after closing the shower tap is not a defect but a technical requirement!

A solar shower is not a closed system. If there is a demand for hot water, cold water enters the tank from below through the valve, pushing out the hot water already present in the upper part of the tank.

The entire shower body is filled with water and acts as a solar heater.

The pressure that builds up as a result of heating can escape from the shower head.

Dismantling at the end of the season

During the winter period, the shower must be COMPLETELY EMPTIED of its water content. Furthermore, during the winter, the shower must be dismantled and stored in a dry place.

Failure to observe this warning may cause frost damage to the product.

Frost damage is not covered by the warranty.

1) Close the shower and remove the garden hose.

2) To empty the shower, return the mixer to the HOT position (approx. 2 minutes) and open the drain plug.

3) Remove the fixing screws on the base and empty the remaining water from the bottom of the shower by tilting the shower (absolutely necessary!)

Cleaning

Use standard commercially available cleaning agents for cleaning. Do not use cleaning agents containing solvents, abrasive cleaning agents or hard sponges, brushes, etc.